The below post contains affiliate links.
I'm not sure what to really call this thing. It's like a door, but miniature. Heavy like a door for sure :) I'm just using it on my porch, but there are a ton of different ways you can display it and put it in your house. I found something similar to this at a vintage sale I went a few months back, and they were asking gobs of money for it, like $130. Yeah. It was so cute, me and my friend had to make one for ourselves. We made both of ours for about $16 each...minus the wreath and bow. So, total, maybe in the low $20s.
I've been loving my porch this past year ever since I redecorated it and thought this would be the perfect addition.
The supplies I used:
1 piece of bead board cut at 18x32" (I bought a 32"x48"' piece and cut mine to size)
1 piece of 1/4" plywood 18x24" (I bought a 2x4' piece and cut it to size)
2 - 2x4s miter cut so the longest side is 57"
2 - 2x4s miter cut so the longest side is 23.5"
1 - 2x4 cut at 16.5"
Nail gun/ 1" nails
1" screws
Mending plates
Paint
Java glaze
Vinyl "welcome" (got mine from the Silhouette store)
Ribbon or bow
Hanger
Wreath
First step: If you didn't have the lumber store cut your wood yet, do that. I used my
Dremel Ultra Saw to cut both my bead board and plywood to size.
I then lined up the bead board and plywood on the ground and left a little gap in the middle. I measured the length of the two boards first and made that the longest length of the two side 2x4s (57"). I then placed those together an decided on the width of the top and bottom boards. (that's where I got the measurements from above) I made sure my 2x4s overlapped the plywood and bead board by about an inch on the sides.
Once the boards were cut, I laid them on a flat surface and squared them.
I then used mending plates to secure all of them together. You can also use wood glue and a 2" screw through the side to help it stay secure.
I then measured the middle section and cut out the middle 2x4 to fit, which was 16.5". At his point, I also measured about 22" down from the top on both sides and placed the top of my 2x4 on these points. I didn't do this until I realized I needed to at the end, but at this point, use mending plates to secure the 2x4 middle section to the sides.
I placed the plywood on the top and secured it in place using my nail gun.
I then placed the bead board on the bottom and secure that too. At this point, I decided to secure the corners with the screws to give it more stability.
Now that it was all together, I painted it with some white latex paint.
I decided to give it a little wear and distressed the edges and some of the wood with sandpaper.
I used some glaze on the edges and in the middle part on the bead board.
I made my bow and secured it to the center of the middle 2x4. I also added the hanger on the bead board for my wreath.
I chose this "welcome" from the Silhouette design store and cut it out with my
Silhouette. I used some transfer tape to place it on the board.
And here it is all done!
You can't see it very well on my porch from this angle, but I think it added the perfect 'welcoming' touch :)
I did end up scrunching up the bow a little bit to give it more bounce. I wasn't too happy with the rigidity of it before.
The wreath I got from Hobby Lobby. I don't recall how much that cost, but I know they still carry it (at least as of me writing this post :) ).
This porch has come a long way since this:
Yeah. It seriously looked like that, maybe worse for years :/ Nothing like a first impression coming into my house, huh? lol Sometimes things just tend to get neglected....which makes it that more fun to spruce them up! :)
pin for later:
Disclosure of Material Connection: Some of the links in the post above are “affiliate links.” This means if you click on the link and purchase the item, I will receive an affiliate commission. Regardless, I only recommend products or services I use personally and believe will add value to my readers. I am disclosing this in accordance with the Federal Trade Commission’s 16 CFR, Part 255: “Guides Concerning the Use of Endorsements and Testimonials in Advertising.”
إرسال تعليق