Amongst other things, I mentioned how wonderful they are for creating custom embellishments without the need for any fancy pants equipment.
Yep, waterslide decal paper is a truly fab product, though as great as it is, there is one major drawback - it is not particularly durable.
So, whilst it's perfect for ornamental purposes, it's not ideal for more practical applications....until now that is!
Magic decal coating paper is a complimentary product designed to be used in conjunction with standard decal paper to make the finished transfers durable - yes, even dishwasher resistant!
If you're already familiar with magic decal coating paper then please excuse my tardy excitement, though for everyone else who is just getting to the party now too, feel free to start throwing the streamers!
As mentioned in this previous post, my recently aquired assortment of SLOM jars from IKEA were awaiting some DIY craftiness and magic decals seemed like the perfect partner.
As there are probably several brands of magic decal coating paper out there, each with slightly differing application requirements, for clarity in this tutorial I will specifically pertain to the particular product I used which I got from here....
The paper I received came with one sheet of waterslide decal paper (distinguished by a blue watermark on the back) which you print your image onto and one sheet of the magic coating paper (distinguished by attached translucent protective paper).
GATHER YOUR SUPPLIES
1. Image to transfer
Use anything you like.
I made up my canister labels in Photoshop. I wanted them to be a bit different and quite typographic so decided to style them based on dictionary definitions (my artwork is attached as a free printable if you would like to use them!)
2. Inkjet printer
3. Decal paper (blue watermark on back)
Decal paper comes in clear or white. I'm using the clear paper because I want a transparent background around my image.
4. Magic paper (attached translucent protective paper)
5. Laminator
Basic laminators can be bought for around $20 from most office supply and department stores.
6.Scissors
7. Water
8. Soft cloth
9. Item to embellish
As already mentioned, I'm using my plain SLOM jars from IKEA.
10. Microwave, oven or hairdryer
THE PROCESS
1. Print your image onto the glossy side of your decal paper (DO NOT mirror your image) using an inkjet printer. Allow to dry thoroughly.
I created my canister labels in Photoshop and have attached them below as a free printable if you would like to use them.
2. Separate the translucent protective paper from the magic paper. Do not throw the translucent paper away.
3. Place the magic paper gloss side up on your table. Lay the decal paper printed side down on top of the magic paper. Place the translucent protective paper gloss side down on top of the decal paper.
As my image took up the entire sheet of decal paper I did not need to trim around it first. If you are working with a smaller image you may wish to cut roughly around it with scissors.
4. Laminate your stack of three papers together on low speed and at low temperature.
Basic laminators can be bought for around $20 from most office supply and department stores.
5. Discard the translucent paper. Your decal paper and magic paper should now be fused together. Trim closely around your image - you can see it quite easily through the paper if you hold it up to the light.
Where there is no ink, the decal will leave a very fine, slightly translucent film which is visible close up or on certain angles. As my image is text alone with no border I experimented with techniques and found the neatest finish to be a nice even box (trying to mimic the outline of the text just looked messy). If your image has a distinct border then trim approximately 2mm all the way around it (leaving a small buffer ensures you get a good seal).
GATHER YOUR SUPPLIES
1. Image to transfer
Use anything you like.
I made up my canister labels in Photoshop. I wanted them to be a bit different and quite typographic so decided to style them based on dictionary definitions (my artwork is attached as a free printable if you would like to use them!)
2. Inkjet printer
3. Decal paper (blue watermark on back)
Decal paper comes in clear or white. I'm using the clear paper because I want a transparent background around my image.
4. Magic paper (attached translucent protective paper)
5. Laminator
Basic laminators can be bought for around $20 from most office supply and department stores.
6.Scissors
7. Water
8. Soft cloth
9. Item to embellish
As already mentioned, I'm using my plain SLOM jars from IKEA.
10. Microwave, oven or hairdryer
THE PROCESS
1. Print your image onto the glossy side of your decal paper (DO NOT mirror your image) using an inkjet printer. Allow to dry thoroughly.
I created my canister labels in Photoshop and have attached them below as a free printable if you would like to use them.
2. Separate the translucent protective paper from the magic paper. Do not throw the translucent paper away.
3. Place the magic paper gloss side up on your table. Lay the decal paper printed side down on top of the magic paper. Place the translucent protective paper gloss side down on top of the decal paper.
As my image took up the entire sheet of decal paper I did not need to trim around it first. If you are working with a smaller image you may wish to cut roughly around it with scissors.
Basic laminators can be bought for around $20 from most office supply and department stores.
5. Discard the translucent paper. Your decal paper and magic paper should now be fused together. Trim closely around your image - you can see it quite easily through the paper if you hold it up to the light.
Where there is no ink, the decal will leave a very fine, slightly translucent film which is visible close up or on certain angles. As my image is text alone with no border I experimented with techniques and found the neatest finish to be a nice even box (trying to mimic the outline of the text just looked messy). If your image has a distinct border then trim approximately 2mm all the way around it (leaving a small buffer ensures you get a good seal).
6. Dampen the back of the decal paper (watermarked side) with a cloth until it becomes translucent. Wait around 15 seconds then gently peel the paper away completely.
Important: ensure you remove the watermarked decal paper only at this stage.
7. Quickly immerse the decal in a shallow dish of water to dampen the other side then position it, image side down, on your item, smoothing it down with your fingers and a slightly damp cloth to remove excess water.
8. Carefully slide off the backing paper and manipulate the decal into its exact position then continue to smooth it until it is water and air bubble free (the image for step eight shows the transfer with some minor creases and bubbles. This is only because the photograph depicts the removal of the backing paper before I have smoothed the decal. Rest assured that it does flatten out completely).
9. Finally, set the decal by either:
- Baking in an electric oven for 8 minutes at 150 degrees celsius
- Cooking in a microwave for 5 minutes on low
- Blowing with a hairdryer for 5 - 10 minutes
Although I was hesitant, I did find the courage to run these babies through the dishwasher - twice, just to be certain - and they didn't show any signs of distress. I was honestly AMAZED! Of course given I have only had them for a few day I can hardly vouch for their longevity so advise hand washing for frequent use.
As I mentioned, there is a very faint translucent background (which is the case with regular waterslide decals too) though once the canisters were full it was barely noticeable.
And here are your complimentary printables....
(simply click on the thumbnail then download to your computer)
RESOURCES
Jars: IKEA
Decal Paper: Sounds Creative
If you 'de like to make some labels of your own....
Fonts used:
Courier New
Another Typewriter
Mrs Eaves Bold
I created my labels in Photoshop though you could easily use a basic program like Word.
Yorum Gönder