DIY Tin Can Pencil Holders

Today, I'm going to show you how to make a tin can pencil holder and I'll be showing you how to make two different versions. You can use both of these cans as a pencil or a brush holder. 

Here's how you make there two DIY tin can pencil holder:

For both of these tin cans you want to stick a can at the edge of a piece of paper and take a pencil and put a mark near the bottom of the can on the paper to measure how much you need to cut off of the paper.

Then you want to take a ruler and make a line and cut along the line with scissors and you also want to make sure the paper fits around the can before you make your designs..

After you get your strips of paper cut out, you can make your designs.

For the can with the line you can take a ruler and draw a line in the middle of the paper. Then you can paint the bottom stripe any color you want and when you are done painting, wait for the paint to dry.

For the can with the face, all you have to do is draw a face in the middle of the piece of paper with a permanent marker.

When your designs are done, you need to put the can on the back of the piece of paper.

Then you want to take a glue gun and put a drop of glue on the can and take one end of the paper and put it on the glue.

Then you can glue the other end of the paper over the first edge that was glued on.

Do the same steps for the other can.

Then you can put anything into the tin can pencil holders.

and that's it! In the comments down below let me know what you think about this DIYs.