I picked up this baby for $25 on eBay. Here it is before:
Using fabric trim is such an easy and affordable way to customise, well...anything really!
For anyone wanting to attempt this type of re-furb, a word of warning though....
....unless you have a drum shade, remember that wide lace trim is 'flat' and in order to get a consistent finish on an angled shape there is quite a bit of (jigsaw worthy) cut-and-paste required (I certainly learned this the hard way!).
First, the polished brass base was thoroughly cleaned, any cords and fixtures masked to avoid overspray, then lightly sanded and coated with three fine layers of hammered charcoal spray paint.
I did need to buy a new shade for this project as, unfortunately, I had none the right size lying around. I elected for a natural ivory linen one from Target to contrast with the formality of the lace. Next, two different widths of lovely scalloped lace trim and some fabric glue - fini!
Looks a bit better in this pic than in reality!
And after:
It looks stunning lit up at night.
For anyone wanting to attempt this type of re-furb, a word of warning though....
....unless you have a drum shade, remember that wide lace trim is 'flat' and in order to get a consistent finish on an angled shape there is quite a bit of (jigsaw worthy) cut-and-paste required (I certainly learned this the hard way!).
First, the polished brass base was thoroughly cleaned, any cords and fixtures masked to avoid overspray, then lightly sanded and coated with three fine layers of hammered charcoal spray paint.
I did need to buy a new shade for this project as, unfortunately, I had none the right size lying around. I elected for a natural ivory linen one from Target to contrast with the formality of the lace. Next, two different widths of lovely scalloped lace trim and some fabric glue - fini!
Yorum Gönder